Chillers & Boiler Care

MHM Water Cooled Screw Chiller

MHM · WCS Series · Shenzhen MHI, China

Semi-hermetic twin-screw chiller, 80–850 TR, R-134a, for plants with cooling towers.

Cooling capacity80–850 TR
RefrigerantR-134a
Power supply415 V / 3 ph / 50 Hz
COP (full load)5.5–6.1
Unloading25–100% stepless
Warranty18 months

Genuine spare parts and AMC available

The WCS series pairs semi-hermetic twin-screw compressors with flooded shell-and-tube evaporators to reach full-load COP above 5.5 with condenser water from a cooling tower. Continuous slide-valve unloading from 25% to 100% suits spinning mills and pharmaceutical plants where load moves with shift patterns.

Units are supplied with electronic expansion valves, oil separators, a colour touch controller and BACnet or Modbus gateway. MHM supplies the matching cooling tower, condenser pumps and plate heat exchanger for free cooling as one package.

Where it is used

  • Spinning and weaving mills
  • Pharmaceutical clean rooms
  • Central plants for hospitals
  • Data centre chilled water
  • Beverage bottling lines
ModelCapacity (TR)Capacity (kW)Input power (kW)CompressorsCondenser flow (m³/h)L × W × H (mm)Weight (kg)
MHM-WCS-080 80 281 52.0 1 × screw 60.5 3200 × 1250 × 1850 2650
MHM-WCS-150 150 527 96.8 1 × screw 113.4 3900 × 1450 × 2050 4300
MHM-WCS-250 250 879 160.2 2 × screw 189.1 4400 × 1750 × 2200 6800
MHM-WCS-400 400 1407 254.9 2 × screw 302.6 4900 × 1950 × 2350 9900
MHM-WCS-600 600 2110 380.3 2 × screw 453.9 5600 × 2100 × 2500 13800
MHM-WCS-850 850 2989 536.7 3 × screw 643.0 6400 × 2300 × 2650 19200

Ratings at standard conditions. Capacities change with ambient, water temperatures and fouling; ask for a site-specific selection.

Hermetic scroll or semi-hermetic screw compressors

Low-vibration compressors with capacity staging keep part-load efficiency high across textile and pharma duty cycles.

Microprocessor controller with Modbus RTU

Leaving-water setpoint, alarms and run hours are readable on the panel and shared to a BMS over RS-485.

Electronic expansion valve

Stable superheat control at 25–100% load and during Dhaka summer ambient swings up to 42 °C.

Hydrophilic-coated condenser fins

Corrosion-resistant fins with 40% longer service life in humid, dusty rooftop conditions.

Phase and pressure protection

Phase-loss, reverse-phase, high/low pressure, anti-freeze and flow-switch interlocks as standard.

Factory run-tested

Every unit is charged, run-tested and tagged with a test certificate before dispatch.

MHM WCS Series Catalogue 2026MHM · MHM Water Cooled Screw Chiller
642 KB Download
WCS Performance TablesMHM · MHM Water Cooled Screw Chiller
39 KB Download
MHM rooftop chiller and cooling tower installation in Dhaka
Related

Related equipment

MHMChillers & Boiler Care ACS Series

MHM Air Cooled Scroll Chiller

Packaged rooftop scroll chiller, 30–260 TR, R-410A, tandem compressors with 25% steps.

View details
CarrierChillers & Boiler Care AquaForce 30XA

Carrier 30XA Air Cooled Screw Chiller

AquaForce air-cooled screw chiller, 80–500 TR, R-134a, Touch Pilot control.

View details
MHMMHM Cooling Towers MCT-R Series

MHM FRP Counter-Flow Cooling Tower

Round bottle-type FRP counter-flow tower, 10–1000 TR, rotary sprinkler, PVC infill.

View details
MHMPlate Heat Exchangers MPH Series

MHM Gasketed Plate Heat Exchanger

Stainless plates, NBR/EPDM gaskets, 50 kW–15 MW, for free cooling and process duty.

View details

Enquire about MHM Water Cooled Screw Chiller

Tell us your capacity, site and timeline. We reply with a selection, price and delivery within two working days.